Wireless Router Help :----

• Firewall
• VPN Passthrough

Security :---  

Firewall

Blocks HTTP requests containing the "Host:" string.

Identifies HTTP requests that contain the "Cookie:" string and mangle the cookie. Attempts to stop cookies from being used.

Blocks HTTP requests containing a URL ending in ".js" or ".class".

Blocks HTTP requests containing a URL ending in ".ocx" or ".cab".

Stops the router from responding to "pings" from the WAN.

Prevents multicast packets from reaching the LAN.

Prevents hosts on LAN from using WAN address of router to contact servers on the LAN (which have been configured using port redirection).

Prevents WAN access to port 113.

Log Management

The router can keep logs of all incoming or outgoing traffic for your Internet connection.

To keep activity logs, select Enable. To stop logging, select Disable.

Set this to the required amount of information. Set Log Level higher to log more actions.

To see a temporary log of the Router's most recent incoming traffic, click the Incoming Log button.

To see a temporary log of the Router's most recent outgoing traffic, click the Outgoing Log button.

Check all values and click Save Settings to save your settings. Click Cancel Changes to cancel your unsaved changes.

VPN Passthrough

Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports IPSec Passthrough, PPTP Passthrough and L2TP Passthrough.

Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec tunnels to pass through the router, IPSec Passthrough is enabled by default. To disable IPSec Passthrough, select Disable.

Point-to-Point Tunneling Protocol is the method used to enable VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP tunnels to pass through the router, PPTP Passthrough is enabled by default. To disable PPTP Passthrough, select Disable.

Layer Two (2) Tunneling Protocol, an extension to the PPP protocol that enables ISPs to operate Virtual Private Networks (VPNs). L2TP merges the best features of two other tunneling protocols: PPTP from Microsoft and L2F from Cisco Systems. To allow L2TP tunnels to pass through the router, L2TP Passthrough is enabled by default. To disable L2TP Passthrough, select Disable.

Check all the values and click Save Settings to save your settings. Click Cancel Changes to cancel your unsaved changes.