Wireless Router Help :----

• Services
• PPPoE Server
• VPN
• USB
• NAS
• Hotspot
• My Ad Network

DHCPd assigns IP addresses to your local devices. While the main configuration is on the setup page you can program some nifty special functions here.

• Used domain – You can select here which domain the DHCP clients should get as their local domain. This can be the WAN domain set on the Setup screen or the LAN domain which can be set here.
• LAN Domain – You can define here your local LAN domain which is used as local domain for DNSmasq and DHCP service if chosen above.
• Static Leases – If you want to assign certain hosts a specific address then you can define them here. This is also the way to add hosts with a fixed address to the router's local DNS service (DNSmasq).

There are some extra options you can set by entering them in Additional DHCPD Options.

DNSmasq is a local DNS server. It will resolve all host names known to the router from dhcp (dynamic and static) as well as forwarding and caching DNS entries from remote DNS servers. Local DNS enables DHCP clients on the LAN to resolve static and dynamic DHCP hostnames.
There are some extra options you can set by entering them in Additional DNS Options. For example : 

• static allocation : dhcp-host=AB:CD:EF:11:22:33,192.168.0.10,myhost,myhost.domain,12h
• max lease number : dhcp-lease-max=2
• DHCP server IP range : dhcp-range=192.168.0.110,192.168.0.111,12h 

Note

All options are saved in /tmp/dnsmasq.conf file. The format of this file consists of one option per line.
The complete list of available options : DNSMasq man.

Kai is a means of connecting platform games over the internet. Enable the service and then add XBox MAC addresses separeted with ";". 

• Number of Local Devices – How many consoles to detect before the engine locks the pcap filter. Setting this to 0, means the engine will never lock - which means you can use any number of consoles, but you will notice a performance hit, if your network is busy with other traffic. The best thing to do here is to set the number to the number of consoles you own - that's why it defaults to 1 - because most people have just 1 console.
• UI Listening Port – Specifies which ip/port kaid will use to listen for controller UIs. 

Note

Xbox must be connected directly via one of the Ethernet ports of the router.

RFlow Collector is a traffic monitoring and management tool that allows to watch a complete network of   DIGIANA  routers.

• RFlow Default port is 2055
• MACupd Default port is 2056
• Interval = 10 seems messages will be sent to server each 10 seconds
• Interface : choose which interface to monitor 

Note

For each RFlow and MACupd server IP : enter the IP address of the listening server (win32 PC with RFlow Collector).

Enabling SSHd allows you to access the Linux OS of your router with an SSH client (Putty works well on Windows, for example).

• Password login – allow login with the router password (username is root)
• SSHd Port – the port number for SSHd (default is 22)
• Authorized Keys – here you paste your public keys to enable key-based login (more secure than a simple password)

Enable Syslogd to capture system messages. By default they will be collected in the local file /var/log/messages. To send them to another system, enter the IP address of a remote syslog server.

Enable a telnet server to connect to the router with telnet. The username is root and the password is the router password.

Note

If you using the router in an untrusted environment (for example as a public hotspot), it is strongly recommended to use SSHd and deactivate telnet.

Check all values and click Save Settings to save your settings. Click Cancel Changes to cancel your unsaved changes. Click Reboot router to reboot your router immediately.

PPPoE Server

PPPoE Server.....

Note

Please note....

Click Save Settings to save your settings or click Cancel Changes to cancel your unsaved changes.

PPTP

A VPN technology by Microsoft and remote access vendors. It is implemented in Windows XP. Configuring this allows you to access your LAN at home remotely.

• Server IP – The IP address of your router
• Client IP – A list or range of IP addresses for remotely connected machines. This range should not overlap with the DHCP range (for example 192.168.0.2,192.168.0.3), a range (for example 192.168.0.1-254 or 192.168.0-255.2) or some combination (for example 192.168.0.2,192.168.0.5-8).
• CHAP-Secrets – A list of usernames and passwords for the VPN login, one user per line (Example: joe * joespassword *). For more details look up the pppd man page.

A VPN Client that enable you to connect to VPN servers by Microsoft and remote access vendors. Configuring this allows the router to VPN into a remote network.

• Server IP or DNS Name – The IP address or DNS Name of the VPN server that you would like to connect to (Example: www.MyServer.com).
• Remote Subnet – Remote Subnet of the network you are connecting to (Example: 192.168.2.0).
• Remote Subnet Mask – Remote Subnet Mask of the network you are connecting to (Example: 255.255.255.0).
• MPPE Encryption – The type of security to use for the connection. If you are connecting to another DIGIANA  router you need (Example: mppe required). But if you are connecting to a Windows VPN server you need (Example: mppe required,no40,no56,stateless) or (Example: mppe required, no40,no56,stateful)
• MTU – Default Maximum Transmission Unit (Default: 1450)
• MRU – Default Maximum Receiving Unit (Default: 1450)
• User Name – Enter the UserName that you will use to connect to the VPN server. If you are connecting to another Linux base PPTP server you just need to enter the UserName (Example: root). But if you are connecting to a Windows VPN server you need to enter the servername and username (Example: DOMAIN\\UserName).
• Password – Enter the password of the for the username. 

Check all values and click Save Settings to save your settings. Click Cancel Changes to cancel your unsaved changes.

NAS

FTP Server enables you to serve files : 

• Possibility to serve files over the Internet
• Possibility to serve files on local network

SAMBA Server enables you to acces files : 

• Possibility to access files on router from local network

See also

Hotspot Portal

You can use the router as an Hotspot gateway (Chillispot solution) with authentication, accounting (Radius). ChilliSpot is an open source captive portal or wireless LAN access point controller. It is used for authenticating users of a wireless LAN. It supports web based login which is today's standard for public HotSpots and it supports Wireless Protected Access (WPA) which is the standard of the future. Authentication, authorization and accounting (AAA) is handled by your favorite radius server.

The IP addresses of radius server 1 and 2.

DNS Server IP. It is used to inform the client about the DNS address to use for host name resolution. If this option is not given the system primary DNS is used.

URL of web server to use for authenticating clients.

Radius shared secret for both servers. This secret should be changed in order not to compromise security.

Ethernet interface to listen to for the downlink interface. This option must be specified.

Network access server identifier.

Shared secret between uamserver and chilli. This secret should be set in order not to compromise security.

Allow any DNS server. Normally unauthenticated clients are only allowed to communicate with the DNS servers specified by the dns1 and dns2 options. This option will allow the client to use all DNS servers. This is convenient for clients which are configured to use a fixed set of DNS servers.

Note

For security reasons this option should be combined with a destination NAT firewall rule which forwards all DNS requests to a given DNS server.

IP addresses or network segments the client can access without first authenticating (Comma separated list of domain names). Example: www.chillispot.org,10.11.12.0/24

If this option is given ChilliSpot will try to authenticate all users based on their mac address alone.

You can specify here additional Options.

Note

For more informations about the different options : www.chillispot.org.

Enabling the use of NoCatSplash allows you to redirect a client to a specific web page when connecting via wireless or wired.

The name of the gateway. Whatever you want to call it. "Joe's Pizza Shop and free DSL Cafe" for example. Use the variable $GatewayName in your splash.html page to display this.

Configures the Redirection URL after splash login

Enables the redirection to a specific Homepage after splash login, see above

Space separated list of hostnames. List any hosts (for example, the webserver with the splash page, or other websites) that you would like to allow clients to have web access to (TCP port 80 (HTTP) and 443 (HTTPS)) before they "log in" (before they click on "I Accept" in your splash page), however actual authentication is not supported. List any webservers, that you would like connecting clients to be able to access, before clicking on I Agree on the initial nocatsplash screen. Such as the webserver hosting your EULA or Welcome Page, if it isn't the router itself.

Where all of the application templates (including SplashForm) are hiding (splash.html is the form displayed to users on capture).

Optional URL to fetch dynamic remote splash page from. This should end with the /splash.html, or the name of your splash page.

Note

Leave empty if using a page stored on the router.

Space separated list of ports. Specify TCP ports to denied access to when public class users login. All others will be allowed. If nothing is specified, access is granted to all ports to public class users.

Note

You should *always* exclude port 25 (SMTP), unless you want to run a portal for wanton spam sending. Users should have their own way of sending mail. It sucks, but that's the way it is.

How much time, in seconds, elapses before the client has to see the splash screen again, and click on 'I Agree'. How often a client is shown the EULA or other designated splash page.

Log verbosity (to syslogd and /tmp/nocat.log). Syslogd service must be enabled.

Required only if you DO NOT want your gateway to act as a NAT. Enable this only if you're running a strictly routed network, and don't need the gateway to enable NAT for you. You would not normally use this option. So if you don't understand it, leave it Disabled

Check all values and click Save Settings to save your settings. Click Cancel Changes to cancel your unsaved changes. Click Reboot router to reboot your router immediately.

AnchorFree Ad Network

It's really simple. Broadcast an additional wi-fi signal to your friends and neighbors. They'll be able to get on-line from your network and you'll be able to broadcast your own messages directly to them.

Of course you do. AnchorFree allows you to create your own network,literally. Your network becomes your own community billboard. The more users connect and use your wi-fi network, the more message space you get to advertise on. Share your passions – build community – advertise your business. Its free with AnchorFree.

Once you have activated, AnchorFree will send an email to the registered account owner with simple instructions on broadcasting your own wi-fi network, FAQs, and other pertinent information on displaying your messages and content within that network.

Have questions? Contact us at 

•  For more information please visit
•  www.anchorfree.com/